Discover the full range of PICS professional acrylic sealers. Suited for pattern imprinted concrete (PICSPAVE), block paving, natural stone and more.
Professional acrylic sealers for pattern imprinted concrete, block paving, natural stone and more.
View Our Range
From high-gloss acrylic finishes to water-based clear sealers, the PICS range covers every surface and application.
A solvent-based acrylic sealer ideal for Pattern Imprinted Concrete. The preferred choice for most contractors especially where a glossy look is required. Great for sealing newly installed decorative concrete, or sealing surfaces that need a refresh. Enhances colour depth in Colour Surface Hardeners.
A ready-to-use solvent-based acrylic coating for Pattern Imprinted Concrete with low signs of wear. Good for resealing surfaces that see low traffic. Enhances colour depth and leaves a tough protective finish.
A solvent-based acrylic sealer that stabilises block paving sand and is ideal for porous materials such as Indian sandstone. Apply by sprayer or roller so as to not disturb block paving sand.
A solvent-based acrylic sealer developed for applications where a low-sheen finish is desired. Can be applied by brush, sprayer, or roller.
A solvent-based acrylic sealer with a higher resin content, especially suited for surfaces that will see high traffic or older surfaces showing advances wear needing resealing. Applied by brush, sprayer, or roller.
A water-based sealer ideal for stabilising jointing sand on block paving and sealing porous surfaces. Prevents weed and organic growth, reduces sand loss, and leaves a clear protective finish.
A specialist low-viscosity, polyurethane sealer for concrete floors and walls in commercial and industrial environments. Resistant to abrasion, chemical attack, oil, grease, and water penetration. (Specialist product, contact technical for advice)
A pre-mixed solvent-based high viscosity acrylic sealer ideal for Pattern Imprinted Concrete. Enhances colour depth in Colour Surface Hardeners and leaves a tough protective finish.
Not sure which sealer is right for your project?
Use Our Sealer Guide & CalculatorSelect your surface type and project area below and our tool will recommend a sealer and calculate how much you need.
For professional contractors & tradespeopleEnsure the surface is clean and completely dry before application for best adhesion and finish.
Apply between 5°C and 30°C. Avoid sealing in direct strong sunlight, rain, or frost.
Always complete a small test area first to ensure compatibility and confirm you are happy with the finish.
Two coats are recommended for optimum protection and finish. Additional coats can be applied as needed.
Coverage rates are approximate and may vary depending on surface porosity, texture, and application method. Always complete a test area first. For PU Sealer or specialist applications, please contact PICS UK for advice.
